CL-12SC, 1 Video 2 Audio 1 subcarrier (4.5Mhz) Audio over fiber
Rack-mountable CL-12SC Fiberoptic Composite Video multiplexer
The CL-12SC is ideal for transmitting 1 channel of baseband video, 1 channel of an RF Audio Subcarrier (4.5 MHz) and up to 4 channels of baseband audio on one fibreoptic cable. The CL-12SC operates by digitizing and multiplexing video, audio subcarrier and audio onto a high-speed serial cable. Because the system employs 12-bit digital transmission techniques, performance characteristics are consistent and maintained over the specified distance with no degradation of signal. The low component count and use of custom ASICs increase system reliability and performance. The CL-12SC works with standard singlemode or multimode fibre optic cable and can be wall mounted or rack mounted. Both transmitter and receiver come equipped with internal power supplies. Built-in diagnostics LEDs for each channel; loss of link facilitate the continuous monitoring of all phases of operation.
A subcarrier is one telecommunication carrier that is carried on top of another carrier so that effectively two signals are carried at the same time. At the receiving end, the main carrier and subcarrier signals are demodulated separately. A subcarrier can be used for some purpose entirely different from the purpose of the main carrier. For example, broadcast audio signals in the AM and FM ranges can carry a subcarrier along with the main audio signal. According to the U.S. Federal Communications Commission, these subcarrier channels can be used for many different purposes, "including (but not limited to) paging, inventory distribution, bus dispatching, stock market reports, traffic control signal switching.
For Sales Inquiries please contact us today: Contact Us!
Features
- High Quality 10-bit Digital Sampling of Video Input
- Digital Transmission of Audio Subcarrier Input for 4.5 MHz
- Baseband Video or composite Video/Audio Transmission
- Optional 2, 4 External Channel Audio Transmission
- External Audio Compatible with Balanced or Unbalanced Audio Formats
- Transmit up to 110km over one strand of fiberoptic cable
- High Quality Uncompressed Digital Transmission
- 67dBSNR - Bidirectional Transmission available
Example Aplication
Model Selection
| CL-12SC-T | 1 Video, 2 Audio 1 subcarrier 4.5Mhz Audio fiber optic transmitter 40Km , Singlemode, SC/APC |
| CL-12SC-R | 1 Video, 2 Audio 1 subcarrier 4.5Mhz Audio fiber optic receiver 40Km , Singlemode, SC/APC |
| CL-14SC-T | 1 Video, 4 Audio 1 subcarier 4.5Mhz Audio to fiber transmitter 40Km , Singlemode, SC/APC |
| CL-14SC-R | 1 Video, 4 Audio 1 subcarrier 4.5Mhz Audio to fiber receiver 40Km , Singlemode, SC/APC |
| CL-XX-X-80 | 1 Video, 4 Audio 1 subcarrier 4.5Mhz Audio to fiber , 80Km |
| CL-XX-X-120 | 1 Video, 4 Audio 1 subcarrier 4.5Mhz Audio to fiber , 120Km |
Specifications
| Standars: | NTSC, PAL, SECAM |
| Channels: | 1 x Baseband Video, 1 x 4.5 MHz Audio Subcarrier, 2 or 4 Audio (optional) |
| Video Bandwidth: | 10 Hz to 6.5 MHz |
| SNR/dP/dG: | 67 dB, < 1 deg / < 0.5% |
| Video I/O: | BNC, 1V p-p, 75 ohm |
| Audio Subcarrier: | 10 Hz to 6.5 MHz |
| Audio Subcarrie I/O: | BNC, 1V p-p, 75 ohm |
| External Audio I/O: | Terminal Block, 1V p-p, 10 Kohm |
| Dimensions: | 480mm x 225mm x 44mm |
| Environment: | Operating temperature: 0°C to 50°C Storage temperature: -20°C to 70°C Operating humidity: 10% to 90% RH Storage humidity: 5% to 90% RH |
| Input Power Requirements: | Voltage: 110/240V Auto-sense Internal Power |