ModelCL-2000

CL-2000, HD Component Video or VGA Video to QAM Inserter

Our CL-2000 creates HD-TV 720p/1080i Channels  -(TV digital QAM channel ) for local coaxial broadcasting

 

Comlan is opening the doors to new HDTV applications. The CL-2000 SD-SDI QAM modulator enables cost-effective distribution of SD-SDI, digital signage, HD subscriber sources, and EAS emergency AV signals using existing broadband coax cabling in sports, retail and entertainment facilities, corporate offices, colleges, schools and worship centres. The CL-2000 accepts any HD input signal and modulates it onto a specified QAM digital cable output channel. The signal can then be broadcast through any coax network just like any other cable TV signal. The unit is perfect for all HD signal distribution through coax needs.
For Large Order Discounts contact us today: Contact Us! 

     Inserter has many different Video /audio inputs
 
- HD component
- HD RGBHV
- VGA
- S-Video/Composite video
- Digital coax/optical and stereo audio inputs

 

Example Aplication

Model Selection

Specifications

Aplications: HD Video Input - RGB In: RGBHV DB-15 female (1080i/720p/480p/480i), 59.94/29.97 Hz Component: RCA Y, Pb, Pr (1080i/720p/480p/480i) , 59.94/29.97 Hz S-Video: Y(Composite), C (Blue Pb) 480i, 29.97 Hz Composite Video: RCA female (480i), 29.97 Hz
Standars: Encoding MPEG2 Profile:MP@HL for HD, MP@ML for SD 1080i, 720p, 480p, and 480i resolution, depending on input Video Encoding bitrate 18 or 25 Mbps MPEG1, Layer 2 audio Modulation - Switchable 64/256 QAM, J83 Annex B, Interleaving Modes (128,1) MER 38 dB typical RF - ‘F’, female, 75 ohm impedance Agile, channels 2-135 (48-860 MHz), standard, HRC, or IRC spacing 6 MHz bandwidth fits any open channel without interference to adjacent channels 1 KHz resolution, +/- 30 ppm accuracy, +/- 35 ppm stability 29 dBmV typical output power, attenuated in 5 steps, approx 4 dB
Connection Ports: DB-9 male, RS-232 data link to control system 300 to 19,200 baud (9600 default), 8 data bits, no parity, 1 stop bit Front Pane control - Power button Setup, Select and directional buttons for menu setup Menu LCD, 2 lines of 20 blue characters each
Ports: Data Port - RS232
Channels: RF Channels - 1-125
Video Input: Analog Video - Component: RCA Y, Pb, Pr (1080i/720p/480p/480i) , 59.94/29.97 Hz S-Video: Y(Composite), C (Blue Pb) 480i, 29.97 Hz Composite Video: RCA female (480i), 29.97 Hz RGB In: RGBHV DB-15 female (1080i/720p/480p/480i), 59.94/29.97 Hz
Audio: Audio - Digital SPDIF: Coax and TOSlink optical output, PCM 48K sample rate Analog L and R: 2 stereo RCA female jacks Inputs assignable to video inputs EAS GPI inputs switch AV to composite video and assigned audio
Physical Dimensions: 8.5” [216mm] wide x 1.73” [62mm] height (1RU) x 6.0” [153mm] deep 1.5 lbs [0.68kg] Rack mounting for one or two units side-by-side
Power Requirements: 0.7 A Maximum, 2.1mm coaxial jack (inside center conductor positive) 11.5 to 13.5 VDC, 12 VDC typical
Regulatory Compliance: FCC Class B, ROHS, meets California standards