CL-5000FE, Card Module for System Chassis CL-2005 and CL-5000

CL-5000FE is an Ethernet media converter "two-port switch" that translates transmission signals from a twisted-pair 10/100BASE-TX cable to 100BASE-FX fibre optic cable. It expands network data transmission distances beyond the 100m limitation of copper wire to a maximum of 110km by using fibre optic cable in full duplex mode. The card provides auto-sensing detection of full duplex or half duplex signalling or it could be configured as force 100BASE-TX full duplex. It has easy-to-read diagnostic LED's for continuous status reports on network speed, duplex media access control connection, and network traffic. It uses standard RJ-45 UTP/STP and SC or SC/APC fibre optic connectors and is IEEE 802.3u 10/100BASE-TX/FX compliant and operates with all devices that adhere to this standard. It could link your existing 10Mbps workgroups to a 10OMbps Fast Ethernet backbone.


  1. 10/100 Auto-Sensing or 100 Force Full Duplex
  2. 2 x Switch Ports (2 x RJ-45 connectors)
  3. 1xFX 100 Mbps Fibre Port
  4. Provide full wire-rate 10/100Mbps Switch Ports for greater network performance
  5. Supports "Store and Forward" switching architecture
  6. Connect 10 Mbps, 100 Mbps, Half and Full Duplex simultaneously
  7. 4K MAC address entries per port
  8. Two-way (incoming and outgoing) address learning supported for each port
  9. 170 full-size data packet buffer for 100 Mbps port
  10. Filtering and forwarding rate
  11. 14880 packets per second for 10 Mbps ports, 148800 per second for 100 Mbps ports
  12. Plug-n-Play Ethernet & Fast Ethernet Switch
  13. Easy migration from 10 Mbps to 100 Mbps - IEEE 802.3, 802.3u compliant
  14. 110km Transmission Range
  15. 1 or 2 Fibre Strand Transmission

Model Selection