CL-100T1 is a Fibreoptic Multiplexer with Ethernet + 4xE1/T1 + RS232 interfaces. This system provides multiple broadband transmission capacities over one fibreoptic strand for point-to-point connectivity. With both short/long haul optical transceiver optics available, The CL-100T1 provides transmission distances up to 120 km. The Ethernet interface is 100 Mbps with auto negotiation and can be full/half duplex. The E1 is transparent and in full rate, which can support the E1 framed and unframed mode, including fractional E1. The RS232 interface is set at the rate of 115.2 Kbps, none parity, 8 data bit, 1 stop bit. A pair of CL-100T1 offers a cost effective solution for Fibre to the Building (FTTB) applications to meet various corporate/enterprise demands such as MTU/MDU. The CL-100T1 is indeed an ideal FTTB broadband solution for LAN-to-LAN connectivity, Internet Access, Serial RS232and multiple E1 Broadband Voice/data/video applications.
For Sales Inquiries please contact us today: Contact Us!
-Optical signal interface Optical source: 1310nm/155M Multimode SC Module 1310nm/155M Single mode SC
-Module Optical wavelength range: 1310/1550 +/- 50nm
-Optical connector: SC type Desktop and 19" rack (option) and hardware compatibility with other switches, hubs and adapters
|CL-100T1||Fiberoptic Multiplexer with Ethernet + 4xE1/T1 + RS232, 1 Fiber, 40km|
|CL-100T1/80||Fiberoptic Multiplexer with Ethernet + 4xE1/T1 + RS232, 1 Fiber, 80km|
|CL-100T1/110||Fiberoptic Multiplexer with Ethernet + 4xE1/T1 + Rs232, 1 Fiber, 110km|
|E1 Interfaces:||Line Interface: ITU-T G.703 Line Rate: 2.048 Mbps +/- 50ppm Line Code: HDB3 Frame Format: Unframed Line Impedance: 120 ohm Connectors: RJ-48C|
|T1 Interfaces:||Line Interface: ANSI T1.403, ITU-T G.703 Line Rate: 1.544 Mbps +/- 50ppm Line Code: B8ZS Frame Format: Unframed Line Impedance: 100 ohm Connectors: RJ-48C|
|Ethernet Interfaces:||High performance bridge for Ethernet extension 100BASE-T Ethernet interface Fully compatible with IEEE802.3, 802.3u Line Rate: up to 115200 bps Connects: RJ-45 to RS232 DB9 cable|
|Dimensions:||260mm x 151 mm x 44mm|
|Operating Environment:||Humidity: 5% to 95% non - condensing Temperature: 0Â°C to +50Â°C|
|Regulatory Compliance:||CE, FCC Rules Part 15 Class A|
|Status LED:||POWER: power is ON LAN: Ethernet LAN port is in connection FIBER: Fiber port is in connection RS232: RS232 serial port is in connection E1/T1: Each corresponding E1/T1 port is in connection LOS: Each corresponding E1/T1 port is in loss of synchronization|